一、結構與運行優勢

　　1、 Structural and operational advantages

　　無油設計，介質純凈

　　Oil free design, pure medium

　　高壓羅茨鼓風機內部無需油類潤滑，輸出氣體清潔無污染，特別適用于食品、醫藥等對氣體純度要求嚴苛的場景。

　　The high-pressure Roots blower does not require oil lubrication inside, and the output gas is clean and pollution-free, especially suitable for scenarios such as food and medicine that require strict gas purity.

　　結構精簡，維護便捷

　　Simplified structure and easy maintenance

　　零部件少，無往復運動機構（如活塞）和氣閥，易損件極少，故障率低。

　　There are few components, no reciprocating motion mechanism (such as piston) and air valve, very few vulnerable parts, and low failure rate.

　　維護成本低，日常保養僅需清理、潤滑，部件更換（如軸承、皮帶）成本可控。

　　Low maintenance cost, daily maintenance only requires cleaning and lubrication, and the cost of component replacement (such as bearings and belts) is controllable.

　　動力平衡，運行平穩

　　Power balance, smooth operation

　　轉子高速運轉時動力平衡性好，無需重型基礎，振動和噪音顯著低于同類設備。

　　When the rotor operates at high speed, it has good power balance and does not require heavy foundations. The vibration and noise are significantly lower than similar equipment.

　　運轉一周多次吸、排氣，氣流均勻，無需額外配置儲氣罐。

　　Operate multiple times a week for suction and exhaust, with uniform airflow and no need for additional air storage tanks.

　　二、性能優勢

　　2、 Performance advantages

　　壓力穩定，輸送可靠

　　Stable pressure and reliable delivery

　　在氣力輸送、氧化池曝氣等工藝中，能持續提供穩定壓力，確保物料或氣體均勻輸送，避免管道堵塞或流量波動。

　　In processes such as pneumatic conveying and oxidation tank aeration, stable pressure can be continuously provided to ensure uniform transportation of materials or gases, avoiding pipeline blockage or flow fluctuations.

　　風量調節靈活，節能高效

　　Flexible air volume adjustment, energy-saving and efficient

　　調節范圍寬廣，可根據實際需求調整風量，減少能源浪費。

　　The adjustment range is wide, and the air volume can be adjusted according to actual needs to reduce energy waste.

　　工作效率達70%-90%（部分優化設計可達85%-90%），優于活塞式壓縮機。

　　The work efficiency reaches 70% -90% (partially optimized design can reach 85% -90%), which is superior to piston compressors.

　　適應性強，耐腐蝕

　　Strong adaptability and corrosion resistance

　　適用于多種氣力輸送系統，對管道和密封材料要求低。

　　Suitable for various pneumatic conveying systems, with low requirements for pipelines and sealing materials.

　　主體采用耐腐蝕材料，可在粉塵、腐蝕性氣體等惡劣環境中長期穩定運行。

　　The main body is made of corrosion-resistant materials, which can operate stably for a long time in harsh environments such as dust and corrosive gases.

　　三、設計與安全優勢

　　3、 Design and safety advantages

　　高壓輸出，滿足特殊需求

　　High voltage output to meet special needs

　　通過強化轉子組、增大體積和轉速，實現30kPa~200kPa的高壓輸出，適用于需要高壓氣體的場景（如反滲透、氣力輸送）。

　　By strengthening the rotor group, increasing the volume and speed, a high-pressure output of 30kPa~200kPa can be achieved, which is suitable for scenarios that require high-pressure gas, such as reverse osmosis and pneumatic conveying.

　　安全設計，防止泄漏

　　Safe design to prevent leakage

　　轉子通過同步齒輪嚙合，避免直接接觸磨損。

　　The rotor is meshed with synchronous gears to avoid direct contact wear.

　　密封機構防止潤滑油滲入氣腔，確保氣體純凈。

　　The sealing mechanism prevents lubricating oil from seeping into the air chamber, ensuring the purity of the gas.

　　本文由高壓羅茨鼓風機友情奉獻.更多有關的知識請點擊:http://www.chmrhs.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from the pneumatic conveying system For more information, please click: http://www.chmrhs.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message